Brochure Download
Key Clamps
Key Clamp Tube
Handrail Kits
DDA Range

Key Clamp

Fisher Alvin Key Clamps are are manufactured from high quality galvanised steel. We have a wide range of key clamps as well as galvanised steel tubing from our extensive stocks which have been specifically designed to meet an ever-increasing number of needs. Whether your requirement is for a steel handrail to run alongside a ramp or steps, or a guard rail to provide protection either in a hazardous area or from a height the key clamp system will give you exactly what you are looking for.

Key Clamps are available in the form of Gate Hinge Clamp, Short tee Clamps and many more.

With an increasing number of new uses emerging for key clamps we also support a large number of shop fitters, interior designers, gardeners and farmers in the design and construction of many bespoke solutions – check out our new brochures »

Our Key Clamp Handrail Kits are the perfect solution for implementing almost any handrail requirement and are always held in stock ready for nationwide delivery.

Call Fisher Alvin on 01905 779944 for free project advice or SEND US A DRAWING

  • A26 – FOUR SOCKET CROSS

    £0.00 +VAT
    # Ø A B C D E F
    526.9 32 82 82
    633.7 43 96 96
    742.4 48 120 120
    848.3 50 136 136
    960.3 54 175 175
    Clear selection
  • Fisher Alvin A27 Fitting

    A27 – VARIABLE ELBOW

    Variable Elbow that allows two horizontal tubes to be connected and an angle created that is either greater or less than the standard 90 degrees

    £0.00 +VAT
    # Ø A B C D E F
    633.7 48 44
    742.4 60 54
    848.3 68 64
    Clear selection

  • A28 – CROSS OVER

    £0.00 +VAT
    # Ø A B C D E F
    526.9 36 32
    633.7 42 40
    742.4 54 49
    848.3 60 54
    960.3 62 68
    Clear selection

  • A30 – SOCKET TEE & CROSSOVER

    £0.00 +VAT
    # Ø A B C D E F
    526.9 31 35 41
    633.7 42 40 48
    742.4 54 49 60
    848.3 60 54 68
    960.3 62 68 86
    Clear selection

  • A31 – SWIVEL TEE

    £6.20 +VAT
    # Ø A B C D E F
    633.7 56 33 33
    742.4 62 42 36
    848.3 72 48 41
    Clear selection

  • A32 – CLAMP ON TEE

    £0.00 +VAT
    # Ø A B C D E F
    526.9 50
    633.7 54
    742.4 64
    848.3 74
    960.3 90
    Clear selection

  • A34 – HANDRAIL BRACKET

    £0.00 +VAT
    # Ø A B C D E F
    526.9 76 57 55 45 8 5
    633.7 92 65 58 48 10 10
    742.4 112 84 60 48 10 10
    848.3 112 80 68 54 10 10
    Clear selection

  • A35 – HANDRAIL BRACKET

    £0.00 +VAT
    # Ø A B C D E F
    633.7 86 120
    742.4 95 130
    848.3 104 140
    Clear selection

  • A36 – MALE SWIVEL

    £0.00 +VAT
    # Ø A B C D E F
    526.9 56 39 10
    633.7 66 39 10
    742.4 75 45 10
    848.3 75 45 10
    960.3 100 50 10
    Clear selection

  • A37 – SINGLE FIXING PAD

    £0.00 +VAT
    # Ø A B C D E F
    633.7 60 43
    742.4 66 48
    848.3 70 52
    Clear selection

  • A38 – DOUBLE MALE SWIVEL

    £0.00 +VAT
    # Ø A B C D E F
    526.9 112 38 10
    633.7 123 43 10
    742.4 134 47 10
    848.3 142 51 10
    960.3 160 56 10
    Clear selection

  • A40 – 90 DEGREE CORNER MALE SWIVEL

    £0.00 +VAT
    # Ø A B C D E F
    526.9 38 10
    633.7 46 10
    742.4 48 10
    848.3 54 10
    Clear selection

  • A42 – FEMALE SWIVEL

    £0.00 +VAT
    # Ø A B C D E F
    526.9 59 23 10 9
    633.7 61 25 10 12
    742.4 70 25 10 12
    848.3 77 25 10 12
    960.3 94 36 10 12
    Clear selection

  • A44 – SINGLE SWIVEL COMBINATION

    £0.00 +VAT
    # Ø A B C D E F
    526.9 34 25 56
    633.7 36 25 66
    742.4 45 25 75
    848.3 53 25 75
    960.3 58 36 100
    Clear selection

  • A46 – DOUBLE SWIVEL COMBINATION

    £0.00 +VAT
    # Ø A B C D E F
    526.9 38 25 26
    633.7 43 25 36
    742.4 47 25 45
    848.3 51 25 53
    960.3 56 36 58
    Clear selection

  • A48 – 90 DEGREE SWIVEL COMBINATION

    £0.00 +VAT
    # Ø A B C D E F
    526.9 25 61 99
    633.7 25 61 107
    742.4 25 70 118
    848.3 25 78 132
    Clear selection

  • A50 – SWIVEL BASE

    £0.00 +VAT
    # Ø A B C D E F
    526.9 40 84 116 54 12 48
    633.7 40 84 116 54 12 48
    742.4 40 84 116 54 12 48
    848.3 40 84 116 54 12 48
    960.3 40 84 116 54 12 48
    Clear selection

  • A52 – BASE SWIVEL COMBINATION

    £0.00 +VAT
    # Ø A B C D E F
    526.9 40 34 25 10
    633.7 40 36 25 10
    742.4 40 45 25 10
    848.3 40 53 25 10
    960.3 40 58 36 10
    Clear selection

  • A58 – COLLAR

    £0.00 +VAT
    # Ø A B C D E F
    526.9 22
    633.7 25
    742.4 25
    848.3 25
    Clear selection

  • A60 – GATE EYE

    £0.00 +VAT
    # Ø A B C D E F
    526.9 30 12 25
    633.7 33 12 27
    742.4 37 13 27
    848.3 40 13 27
    Clear selection

Please note: all of our products are supplied in a galvanized steel finish and the black tube shown is for illustrative purposes only. However we are happy to arrange for your goods to be powder coated prior to delivery so simply let us know at the outset and we will ensure this is built in to the price. Due to the nature of these galvanised castings the measurements given here cannot be precise. We therefore do not recommend that any bolt holes are pre-drilled prior to installation of these fittings.

MAIN MENU