Brochure Download

Key Clamp

Fisher Alvin Key Clamps are are manufactured from high quality galvanised steel. We have a wide range of key clamps as well as galvanised steel tubing from our extensive stocks which have been specifically designed to meet an ever-increasing number of needs. Whether your requirement is for a steel handrail to run alongside a ramp or steps, or a guard rail to provide protection either in a hazardous area or from a height the key clamp system will give you exactly what you are looking for.

Key Clamps are available in the form of Gate Hinge Clamp, Short tee Clamps and many more.

With an increasing number of new uses emerging for key clamps we also support a large number of shop fitters, interior designers, gardeners and farmers in the design and construction of many bespoke solutions – check out our new brochures »

Our Key Clamp Handrail Kits are the perfect solution for implementing almost any handrail requirement and are always held in stock ready for nationwide delivery.

Call Fisher Alvin on 01905 779944 for free project advice or SEND US A DRAWING

  • C59A – ANGLE BASE FLANGE 30° TO 45°

    £0.00 +VAT
    # Ø A B C D E F
    742.4 76 106 81 138
    848.3 89 115 85 155
    Clear selection
  • C65G – METAL END CAP

    £0.00 +VAT
    # Ø A B C D E F
    526.9 1
    633.7 1
    742.4 1
    848.3 1
    960.3 1
    Clear selection
  • C72 – ACUTE ANGLE ELBOW 30° TO 45°

    £0.00 +VAT
    # Ø A B C D E F
    742.4 59
    848.3 68
    Clear selection
  • C72A – ACUTE ANGLE ELBOW 11° TO 30°

    £0.00 +VAT
    # Ø A B C D E F
    742.4 58
    848.3 63
    Clear selection
  • C201LH – LEFT HAND LEVEL TO SLOPING DOWN SIDE OUTLET ELBOW 30° to 45°

    £0.00 +VAT
    # Ø A B C D E F
    742.4 86 60
    848.3 60 68
    Clear selection
  • C201RH – RIGHT HAND LEVEL TO SLOPING DOWN SIDE OUTLET ELBOW 30° to 45°

    £0.00 +VAT
    # Ø A B C D E F
    742.4 86 60
    848.3 60 68
    Clear selection
  • C211LH – LEFT HAND LEVEL TO SLOPING DOWN SIDE OUTLET TEE 30° TO 45°

    £0.00 +VAT
    # Ø A B C D E F
    742.4 86 60 42
    848.3 92 68 47
    Clear selection
  • C211RH – RIGHT HAND LEVEL TO SLOPING DOWN SIDE OUTLET TEE 30° TO 45°

    £0.00 +VAT
    # Ø A B C D E F
    742.4 86 60 42
    848.3 92 68 47
    Clear selection
  • C221 – LEVEL TO SLOPING / UP CROSS 30° TO 45°

    £0.00 +VAT
    # Ø A B C D E F
    742.4 86 60 42
    848.3 92 68 47
    Clear selection
  • C229 – SINGLE SOCKET TEE 11° TO 30°

    £0.00 +VAT
    # Ø A B C D E F
    742.4 99 54
    848.3 109 59
    Clear selection
  • C245 – THREE SOCKET TEE 30° TO 45°

    £0.00 +VAT
    # Ø A B C D E F
    742.4 180
    848.3 216
    Clear selection
  • G2 – GRADIENT SHORT TEE

    £0.00 +VAT
    # Ø A B C D E F
    742.4 68 64
    848.3 68 64
    Clear selection
  • G4 – GRADIENT LONG TEE

    £0.00 +VAT
    # Ø A B C D E F
    742.4 144 76
    848.3 144 76
    Clear selection
  • G6 – GRADIENT ELBOW

    £0.00 +VAT
    # Ø A B C D E F
    742.4 68
    848.3 68
    Clear selection
  • G12 – GRADIENT BASE PLATE

    £0.00 +VAT
    # Ø A B C D E F
    742.4 152 112 92 88 14 10
    848.3 152 112 92 88 14 10
    Clear selection
  • G22 – GRADIENT CROSS TEE

    £0.00 +VAT
    # Ø A B C D E F
    742.4 68 64
    848.3 68 64
    Clear selection
  • ANC – ANCHOR BOLT

    £0.00 +VAT
    # Ø A B C D E F
    633.7 10
    742.4 10
    848.3 12
    960.3 12
    Clear selection
  • RK-RMS

    £0.00 +VAT
    # Ø A B C D E F
    742.4 550 1100
    848.3 550 1100
    Clear selection
  • RK-RDS

    £0.00 +VAT
    # Ø A B C D E F
    742.4 550 1100
    848.3 550 1100
    Clear selection
  • RK-RES

    £0.00 +VAT
    # Ø A B C D E F
    742.4 550 1100
    848.3 550 1100
    Clear selection

Please note: all of our products are supplied in a galvanized steel finish and the black tube shown is for illustrative purposes only. However we are happy to arrange for your goods to be powder coated prior to delivery so simply let us know at the outset and we will ensure this is built in to the price. Due to the nature of these galvanised castings the measurements given here cannot be precise. We therefore do not recommend that any bolt holes are pre-drilled prior to installation of these fittings.