Showing 1–16 of 44 results

  • Braked Castor Wheel

    POA
    Optional sealing ring, to obtain the best finish when using DDA range.
    # Ø A
    633.7 75
    View Size Chart
    Clear selection
  • Tube 6.4m

    POA
    # Ø A
    526.9 6400
    633.7 6400
    742.4 6400
    848.3 6400
    960.3 6400
    View Size Chart
    Clear selection
  • Tube 3.2m

    POA
    # Ø A
    526.9 3200
    633.7 3200
    742.4 3200
    848.3 3200
    960.3 3200
    View Size Chart
    Clear selection
  • Tube 1.6m

    POA
    # Ø A
    526.9 3200
    633.7 3200
    742.4 3200
    848.3 3200
    960.3 3200
    View Size Chart
    Clear selection
  • Tube 2.13m

    POA
    # Ø A
    526.9 3200
    633.7 3200
    742.4 3200
    848.3 3200
    960.3 3200
    View Size Chart
    Clear selection
  • Tube 2.4m

    POA
    # Ø A
    526.9 3200
    633.7 3200
    742.4 3200
    848.3 3200
    960.3 3200
    View Size Chart
    Clear selection
  • C229 – SINGLE SOCKET TEE 11° TO 30°

    POA
    The adjustable Short Tee fitting will accommodate any rake angle from 11° to 30°. The C229 Key Clamp fitting can be used for any Tee Joint to make an angle of between 11° & 30°.
    # Ø A B
    742.4 99 54
    848.3 109 59
    View Size Chart
    Clear selection
  • C245 – THREE SOCKET TEE 30° TO 45°

    POA
    The C245 Key Clamp fitting is used on Safety Railing with slopes between 30° & 45° and fixes the top rail to a vertical intermediate upright.
    # Ø A
    742.4 180
    848.3 216
    View Size Chart
    Clear selection
  • C221 – LEVEL TO SLOPING / UP CROSS 30° TO 45°

    POA
    The C221 Key Clamp fitting is used to form a cross on handrails where the mid rail changes from either level to sloping down or level to sloping up the stairs. Adjustable between 30° & 45°.
    # Ø A B C
    742.4 86 60 42
    848.3 92 68 47
    View Size Chart
    Clear selection
  • C211LH – LEFT HAND LEVEL TO SLOPING DOWN SIDE OUTLET TEE 30° TO 45°

    POA
    The C211LH Key Clamp fitting is used to form a Left-Hand Side Outlet Tee on handrails where the mid rail changes from level to sloping down the stairs. Adjustable between 30° & 45°.
    # Ø A B C
    742.4 86 60 42
    848.3 92 68 47
    View Size Chart
    Clear selection
  • C201RH – RIGHT HAND LEVEL TO SLOPING DOWN SIDE OUTLET ELBOW 30° to 45°

    POA
    The C201RH Key Clamp fitting is used to form a Right-Hand Side Outlet Tee on handrails where the mid rail changes from level to sloping down the stairs. Adjustable between 30° & 45°.
    # Ø A B
    742.4 86 60
    848.3 60 68
    View Size Chart
    Clear selection
  • C201LH – LEFT HAND LEVEL TO SLOPING DOWN SIDE OUTLET ELBOW 30° to 45°

    POA
    The C201LH Key Clamp fitting is used to form a Left -Hand Side Outlet Elbow on handrails where the top rail changes from level to sloping down the stairs. Adjustable between 30° & 45°.
    # Ø A B
    742.4 86 60
    848.3 60 68
    View Size Chart
    Clear selection
  • C72A – ACUTE ANGLE ELBOW 11° TO 30°

    POA
    The C72A Key Clamp fitting is used as an alternative to bending, or when a junction between a sloping tube and an end post is required i.e. when construction a guardrail on staircases between 11° & 30°.
    # Ø A
    742.4 58
    848.3 63
    View Size Chart
    Clear selection
  • C72 – ACUTE ANGLE ELBOW 30° TO 45°

    POA
    The C72 Key Clamp fitting is used when a junction between a sloping tube and an end post is required 30°- 45, i.e. when building a guardrail on staircases between 30° & 45°.
    # Ø A
    742.4 59
    848.3 68
    View Size Chart
    Clear selection
  • C65G – METAL END CAP

    POA
    This metal plug is hard to remove once it has been driven in. Note this metal insert can only be used in conjunction with tube with a wall thickness of 3.2mm. There is an alternative plastic version – A68 Key Clamp fitting.
    # Ø A
    526.9 1
    633.7 1
    742.4 1
    848.3 1
    960.3 1
    View Size Chart
    Clear selection
  • C59A – ANGLE BASE FLANGE 30° TO 45°

    POA
    The C59 Key Clamp fitting is similar to a type G12, the fitting is used to set the upright at an angle between 11º–30º. This fitting should only be subjected to light loads which cannot be positioned at 90º to the applied load. For greater loads or other tube sizes a type A12 flange should be used with the upright bent to the required angle.
    # Ø A B C D
    742.4 76 106 81 138
    848.3 89 115 85 155
    View Size Chart
    Clear selection