Showing 1–16 of 22 results

  • Key Clamp C229 - SINGLE SOCKET TEE 11° TO 30°

    Key Clamp C229 – SINGLE SOCKET TEE 11° TO 30°

    POA
    The adjustable Short Tee fitting will accommodate any rake angle from 11° to 30°. The C229 Key Clamp fitting can be used for any Tee Joint to make an angle of between 11° & 30°.
    # Ø A B
    742.4 99 54
    848.3 109 59
    View Size Chart
    Clear selection
  • Key Clamp C245 - THREE SOCKET TEE 30° TO 45°

    Key Clamp C245 – THREE SOCKET TEE 30° TO 45°

    POA
    The C245 Key Clamp fitting is used on Safety Railing with slopes between 30° & 45° and fixes the top rail to a vertical intermediate upright.
    # Ø A
    742.4 180
    848.3 216
    View Size Chart
    Clear selection
  • Key Clamp C221 - LEVEL TO SLOPING / UP CROSS 30° TO 45°

    Key Clamp C221 – LEVEL TO SLOPING / UP CROSS 30° TO 45°

    POA
    The C221 Key Clamp fitting is used to form a cross on handrails where the mid rail changes from either level to sloping down or level to sloping up the stairs. Adjustable between 30° & 45°.
    # Ø A B C
    742.4 86 60 42
    848.3 92 68 47
    View Size Chart
    Clear selection
  • Key Clamp C211LH - LEFT HAND LEVEL TO SLOPING DOWN SIDE OUTLET TEE 30° TO 45°

    Key Clamp C211LH – LEFT HAND LEVEL TO SLOPING DOWN SIDE OUTLET TEE 30° TO 45°

    POA
    The C211LH Key Clamp fitting is used to form a Left-Hand Side Outlet Tee on handrails where the mid rail changes from level to sloping down the stairs. Adjustable between 30° & 45°.
    # Ø A B C
    742.4 86 60 42
    848.3 92 68 47
    View Size Chart
    Clear selection
  • Key Clamp C201RH - RIGHT HAND LEVEL TO SLOPING DOWN SIDE OUTLET ELBOW 30° to 45°

    Key Clamp C201RH – RIGHT HAND LEVEL TO SLOPING DOWN SIDE OUTLET ELBOW 30° to 45°

    POA
    The C201RH Key Clamp fitting is used to form a Right-Hand Side Outlet Tee on handrails where the mid rail changes from level to sloping down the stairs. Adjustable between 30° & 45°.
    # Ø A B
    742.4 86 60
    848.3 60 68
    View Size Chart
    Clear selection
  • Key Clamp C201LH - LEFT HAND LEVEL TO SLOPING DOWN SIDE OUTLET ELBOW 30° to 45°

    Key Clamp C201LH – LEFT HAND LEVEL TO SLOPING DOWN SIDE OUTLET ELBOW 30° to 45°

    POA
    The C201LH Key Clamp fitting is used to form a Left -Hand Side Outlet Elbow on handrails where the top rail changes from level to sloping down the stairs. Adjustable between 30° & 45°.
    # Ø A B
    742.4 86 60
    848.3 60 68
    View Size Chart
    Clear selection
  • Key Clamp C72A - ACUTE ANGLE ELBOW 11° TO 30°

    Key Clamp C72A – ACUTE ANGLE ELBOW 11° TO 30°

    POA
    The C72A Key Clamp fitting is used as an alternative to bending, or when a junction between a sloping tube and an end post is required i.e. when construction a guardrail on staircases between 11° & 30°.
    # Ø A
    742.4 58
    848.3 63
    View Size Chart
    Clear selection
  • Key Clamp C72 - ACUTE ANGLE ELBOW 30° TO 45°

    Key Clamp C72 – ACUTE ANGLE ELBOW 30° TO 45°

    POA
    The C72 Key Clamp fitting is used when a junction between a sloping tube and an end post is required 30°- 45, i.e. when building a guardrail on staircases between 30° & 45°.
    # Ø A
    742.4 59
    848.3 68
    View Size Chart
    Clear selection
  • Key Clamp C65G - METAL END CAP

    Key Clamp C65G – METAL END CAP

    POA
    This metal plug is hard to remove once it has been driven in. Note this metal insert can only be used in conjunction with tube with a wall thickness of 3.2mm. There is an alternative plastic version – A68 Key Clamp fitting.
    # Ø A
    526.9 1
    633.7 1
    742.4 1
    848.3 1
    960.3 1
    View Size Chart
    Clear selection
  • Key Clamp C59A - ANGLE BASE FLANGE 30° TO 45°

    Key Clamp C59A – ANGLE BASE FLANGE 30° TO 45°

    POA
    The C59 Key Clamp fitting is similar to a type G12, the fitting is used to set the upright at an angle between 11º–30º. This fitting should only be subjected to light loads which cannot be positioned at 90º to the applied load. For greater loads or other tube sizes a type A12 flange should be used with the upright bent to the required angle.
    # Ø A B C D
    742.4 76 106 81 138
    848.3 89 115 85 155
    View Size Chart
    Clear selection
  • Key Clamp C59 - ANGLE BASE FLANGE 11° TO 30°

    Key Clamp C59 – ANGLE BASE FLANGE 11° TO 30°

    POA
    The C59 Key Clamp fitting is similar to a type G12, the fitting is used to set the upright at an angle between 11º–30º. This fitting should only be subjected to light loads which cannot be positioned at 90º to the applied load. For greater loads or other tube sizes a type A12 flange should be used with the upright bent to the required angle.
    # Ø A B C D E
    742.4 76 114 85 146 14
    848.3 89 124 95 164 14
    View Size Chart
    Clear selection
  • Key Clamp C58 - TWO SOCKET CROSS 11° TO 30°

    Key Clamp C58 – TWO SOCKET CROSS 11° TO 30°

    POA
    The C58 Key Clamp fitting is used on Safety Railing with slopes between 11º- 30º and fixes the mid rail to a vertical intermediate upright.
    # Ø A B
    742.4 180 55
    848.3 216 60
    View Size Chart
    Clear selection
  • Key Clamp C57 - THREE SOCKET TEE 11° TO 30°

    Key Clamp C57 – THREE SOCKET TEE 11° TO 30°

    POA
    The C57 Key Clamp fitting is used on Safety Railing with slopes between 11º- 30º and fixes the top rail to a vertical intermediate upright.
    # Ø A B
    742.4 180 35
    848.3 216 40
    View Size Chart
    Clear selection
  • Key Clamp C56 - 27½° EAVES FITTING

    Key Clamp C56 – 27½° EAVES FITTING

    POA
    A four-way socket fitting used to construct the eaves of a roof structure.
    # Ø A B C D
    848.3 67 89 83 51
    View Size Chart
    Clear selection
  • Key Clamp C55 - 27½° RIDGE FITTING

    Key Clamp C55 – 27½° RIDGE FITTING

    POA
    A four-way socket fitting used to construct the ridge of a roof structure.
    # Ø A B
    848.3 67 89
    View Size Chart
    Clear selection
  • Key Clamp C042 - LEVEL TO SLOPING UP TEE 30° TO 45°

    Key Clamp C042 – LEVEL TO SLOPING UP TEE 30° TO 45°

    POA
    The C042 Key Clamp fitting is used to form a Tee on handrails where the rail changes from level to sloping up the stairs. Adjustable between 30° & 45°
    # Ø A B
    742.4 142 60
    848.3 154 68
    View Size Chart
    Clear selection