Key Clamp A2 Short Tee: provides a 90 degree tee connection between two tubes. Used for the joint between an end post and the lower rails when a handrail is straight and level, and for a top tee joint on guardrail. It cannot join tube inside the top of the tee: use the A4 long tee when you need that.
Key Clamp A2 Short Tee Sizes
| Code | Size | Tube outside diameter | Nominal bore |
|---|---|---|---|
| A2-5 | 5 | 26.9mm | 3/4″ |
| A2-6 | 6 | 33.7mm | 1″ |
| A2-7 | 7 | 42.4mm | 1 1/4″ |
| A2-8 | 8 | 48.3mm | 1 1/2″ |
| A2-9 | 9 | 60.3mm | 2″ |
Specification
- Material: malleable iron casting, manufactured in excess of BS 6681 (ISO 5922) and BS 2789 (ISO 1083).
- Finish: hot-dip galvanised to BS EN ISO 1461 as standard. Powder coating on request.
- Set screws: Dacromat coated and case hardened. When tightened to 29 ft lb (4.1 kgm), a slip load of 900kg can be obtained on each screw.
- Assembly: tightens onto the tube with a hexagon key. No welding, drilling or threading.
Dimensions are given as guidance only and are subject to manufacturing tolerances. Because these are galvanised castings, we do not recommend pre-drilling bolt holes before the fittings are on site.
Often Used With
A4 long tee, A22 cross tee and A6 90 degree elbow.
Order and Quote
Choose the size, add it to your quote and add the tube lengths you need: we cut galvanised tube to length free. Stock orders go out for next-day delivery, and we reply to quotes within one hour in working hours. Not sure which fitting you need? Send us a sketch and we will list the parts.
See the full key clamp fittings range and our guide to choosing the right key clamp size.
