Armco 90 Degree Internal Corner: a 90 degree internal corner section for Armco crash barrier. It turns the run through an inside corner, in car parks, delivery bays, factories and warehouses.
For a turn the other way, choose the 90 degree external corner.
Armco 90 Degree Internal Corner Specification
| Code | ARMCO90DIC |
|---|---|
| Type | 90 degree internal corner |
| Size | To suit the 3500mm x 3mm standard corrugated beam |
| Finish | Hot dip galvanised to BS EN ISO 1461. Powder coated yellow available as an option |
Features
- Turns the run. Takes the barrier through an inside corner, so the run carries on without a gap.
- One per turn. Order one internal corner for every 90 degree internal turn in the run.
- Matches the beam. Made to suit the standard corrugated beam.
- Galvanised. Hot dip galvanised to BS EN ISO 1461 as standard, which suits barriers that sit outside in car parks and yards. Yellow powder coat is available where the barrier needs to be seen.
- Inside or out. Armco barrier runs work internally and externally, from car parks and delivery bays to factory and warehouse floors.
- Whole run on one order. Beams, posts, terminal ends, corners and fixing bolts all come from the same range.
Often Used With
Armco standard corrugated beams, bolt-down or cast-in posts, and fishtail or pedestrian terminal ends for the open ends of the run.
Order and Quote
Count the internal turns in each run and add the corners to your quote, with the run lengths, corners and open ends. Send a plan or a photo and our free design service will list every part. Stock orders go out for next-day delivery, and we reply to quotes within one hour in working hours.
See the full Armco crash barriers range and our buyer guide.
