Key Clamp RK-A10 Wall Termination Brackets: pair of A10 wall termination brackets for Fisher Alvin key clamp handrail kits, for a run that ends on a wall. Each A10 wall flange is a four holed plate giving a rigid fixing for handrail that terminates on a wall.
For a single fitting, see the A10 wall flange, made in sizes 5 to 9.
Key Clamp RK-A10 Wall Termination Brackets Sizes
| Size | Tube outside diameter | Supplied as |
|---|---|---|
| Size 7 | 42.4mm | Pair of A10 wall flanges |
| Size 8 | 48.3mm | Pair of A10 wall flanges |
Kits give a finished handrail height of 1100mm with uprights at 1300mm centres. The A10 is not a structural fixing for supporting a vertical guardrail post: use the A12 base plate for that.
Features
- Ends on a wall. Finishes the rail neatly where the run meets a wall.
- Rigid fixing. A four holed plate on each bracket.
- Supplied as a pair. Two A10 wall flanges in one listing.
- Bolt down, no welding. You bolt the kit down and tighten the fittings with a hexagon key. No welding or hot works.
- Modular. A damaged section can be replaced on its own, unlike a fabricated rail.
- Extend later. Kits use the same key clamp fittings and galvanised tube we sell loose, so you can extend or alter the run with standard parts.
- Galvanised. Hot-dip galvanised as standard. Powder coating is available: ask at quote stage.
Standards and Testing
Fittings are malleable iron castings, manufactured in excess of BS 6681 (ISO 5922) and BS 2789 (ISO 1083), with Dacromat coated, case hardened set screws. Fittings and tube are hot-dip galvanised to BS EN ISO 1461. The design load for your site and the finished handrail must be checked by whoever signs it off.
Often Used With
Build the run from the other kit sections: RK-RMS mid section, RK-RES end section, RK-RDS end D section, RK-R90 90 degree corner and RK-HRP horizontal rail pair. Add an A11 kick plate base plate on roofs and mezzanines, and close an access opening with a self-closing gate, which closes automatically behind the user.
Order and Quote
Measure the run and note the ends, corners and any point where the rail meets a wall. Choose size 7 or size 8, add the sections to your quote and tell us the surface you are bolting to. Not sure which pieces you need? Send us the layout and we will list them. Any extra tube is cut to length free. Stock orders go out for next-day delivery, and we reply to quotes within one hour in working hours.
See the full key clamp handrail kits range and our buyer guide.
