A freestanding step-over kit for obstacles 1400mm high, giving a handrailed route over pipework, plant and equipment, and between roof levels. It stands on base feet for membrane, asphalt and PVC roofs, so nothing goes through the waterproofing.
For concrete roofs and floors you can bolt down to, choose the fixed version, STCR1400. The next kit height down in this version is STMB1200. For obstacles over 1400mm, see bespoke step-overs.
Freestanding Step-Over Kit Specification
| Code | STMB1400 |
|---|---|
| Type | Freestanding |
| Obstacle height | 1400mm |
| Width | 1000mm |
| Surface | Membrane, asphalt and PVC roofs |
| Feet | Base feet to suit the roof type |
| Guarding | Double handrail both sides, toe-boards |
| Treads | Anti-slip nylon |
| Frame | Galvanised steel tube and tubular galvanised fittings |
| Supplied | Flat packed, pre-assembled as far as possible, with full assembly instructions |
Measure the obstacle at its highest point. If your measurement falls between two kit heights, send it to us and we will confirm which kit suits. Every kit is 1000mm wide, so check the clear width between plant and other obstacles before you order.
Features
- Handrailed both sides. A double handrail on each side, with toe-boards.
- Anti-slip treads. Nylon treads give secure footing on the crossing.
- Nothing through the waterproofing. Base feet stand on membrane, asphalt and PVC roofs.
- No welding. Goes together without specialist tools. The frame is bolted, not welded, so it can be adjusted, repaired or moved later.
- Less work on site. Supplied flat packed and pre-assembled as far as possible, with full assembly instructions.
- In stock. All ten standard kits are held in stock.
Standards and Testing
Standard step-over kits are listed to BS EN 14122 Part 3.
Often Used With
On a roof, step-overs sit on the same route as roof edge protection and skylight guardrails. For low trip hazards such as cable trays, see mini step-over kits. For metal roofs or less than 1000mm of room, see bespoke step-overs.
Order and Quote
Add the kit to your quote and tell us the obstacle height at its highest point, the roof or floor surface and the clear width available. Not sure which kit suits? Send us the measurements and photos and we will confirm. Stock orders go out for next-day delivery, and we reply to quotes within one hour in working hours.
See the full standard step-over kits range and our buyer guide.
