Opens in a new tab
Fisher AlvinFisher Drinkers ↗Supplying galvanised steel since 1912
Tel: 01905 779944Get a quote
Quote within one hour
Next-day delivery on stock orders
Free design service

Freestanding Step-Over Kit, 600mm

Freestanding step-over kit for obstacles 600mm high, 1000mm wide, for membrane, asphalt and PVC roofs. Galvanised steel tube and fittings, anti-slip nylon treads and a double handrail both sides. Base feet mean nothing goes through the waterproofing.

POA
View Size Chart

Quote Within One Hour

In working hours. Next-day delivery on stock orders.

Not sure it is the right part? and we will check it for you.

A freestanding step-over kit for obstacles 600mm high, giving a handrailed route over pipework, plant and equipment, and between roof levels. It stands on base feet for membrane, asphalt and PVC roofs, so nothing goes through the waterproofing.

For concrete roofs and floors you can bolt down to, choose the fixed version, STCR600. The next kit height up in this version is STMB800.

Freestanding Step-Over Kit Specification

CodeSTMB600
TypeFreestanding
Obstacle height600mm
Width1000mm
SurfaceMembrane, asphalt and PVC roofs
FeetBase feet to suit the roof type
GuardingDouble handrail both sides, toe-boards
TreadsAnti-slip nylon
FrameGalvanised steel tube and tubular galvanised fittings
SuppliedFlat packed, pre-assembled as far as possible, with full assembly instructions

Measure the obstacle at its highest point. If your measurement falls between two kit heights, send it to us and we will confirm which kit suits. Every kit is 1000mm wide, so check the clear width between plant and other obstacles before you order.

Features

  • Handrailed both sides. A double handrail on each side, with toe-boards.
  • Anti-slip treads. Nylon treads give secure footing on the crossing.
  • Nothing through the waterproofing. Base feet stand on membrane, asphalt and PVC roofs.
  • No welding. Goes together without specialist tools. The frame is bolted, not welded, so it can be adjusted, repaired or moved later.
  • Less work on site. Supplied flat packed and pre-assembled as far as possible, with full assembly instructions.
  • In stock. All ten standard kits are held in stock.

Standards and Testing

Standard step-over kits are listed to BS EN 14122 Part 3.

Often Used With

On a roof, step-overs sit on the same route as roof edge protection and skylight guardrails. For low trip hazards such as cable trays, see mini step-over kits. For metal roofs or less than 1000mm of room, see bespoke step-overs.

Order and Quote

Add the kit to your quote and tell us the obstacle height at its highest point, the roof or floor surface and the clear width available. Not sure which kit suits? Send us the measurements and photos and we will confirm. Stock orders go out for next-day delivery, and we reply to quotes within one hour in working hours.

See the full standard step-over kits range and our buyer guide.

Part of the range

Standard Step-Over Kits

See every product in the range and the buyer guide, or send us the job and we quote within one hour.

Size Chart

#Ø (mm)
✕

Get a quote within one hour

Tell us what you need: products, quantities, lengths or a sketch. We reply within one hour in working hours. Prefer to talk? Call 01905 779944.

Supplying since 1912
Quote within 1 hour
Tube cut to length free
Free design service
Next-day delivery on stock orders